The structural steel 4130 steel with high strength and toughness, high hardenability. In the oil, the critical quenching diameter 15 ~ 70mm. The structural steel 4130 steel hot strength is also good, at below 500 ℃ with a sufficiently high temperature strength, But the strength was significantly decreased at 550 ℃. When the lower limit of the content of alloying elements, the welding is quite good, but the content of alloying elements is close to the upper limit, the welding performance medium. And the need to preheat to 175 ℃ above before welding. Good machinability of the 4130 steel, cold deformation plasticity medium. When the heat treatment, has a first temper brittleness in the range of 300 ~ 350 ℃, may form white spots.
The structural steel 4130 steel is typically used in quenched and tempered condition. In medium-sized machinery manufacturing industry mainly for the manufacture of large cross-section, parts working under high stress conditions, such as shafts, spindles and steering wheel to withstand high loads, bolts, studs, and other gear. In the chemical industry for the manufacture of welded parts, welded structure consisting of plates and pipes. For the manufacture high-pressure pipe at containing nitrogen and hydrogen media work and the temperature does not exceed 250 ℃. Fasteners used in steam turbines, boilers manufactured manufacturing work below 450 ℃, below 500 ℃ under high pressure flange and flange cover.
website： http://www.songshunsteel.com/
Original Address http://www.songshunsteel.com/news_show_27_22_25.html
Reproduced please specify. xiaoyunone110
没有评论:
发表评论